LHP https://www.crtech.com/ en Modeling and Sizing a Thermoelectric Cooler Within a Thermal Analyzer https://www.crtech.com/modeling-and-sizing-thermoelectric-cooler-within-thermal-analyzer <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">Modeling and Sizing a Thermoelectric Cooler Within a Thermal Analyzer</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T16:33:31-04:00" title="Wednesday, July 15, 2015 - 16:33" class="datetime">Wed, 07/15/2015 - 16:33</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>Thermoelectric couples are solid-state devices capable of generating electrical power from a temperature gradient (known as the Seebeck effect) or converting electrical energy into a temperature gradient (known as the Peltier effect). Thermoelectric coolers, being solid state devices, have no moving parts which makes them inherently reliable and ideal for cooling components in a system sensitive to mechanical vibration. The ability to use TECs to heat as well as cool makes them suitable for applications requiring temperature stabilization of a device over a specified temperature range. Although these devices have been around for years, they are gaining popularity in the aerospace industry for providing temperature control within optical systems and for loop heat pipes.</p> <p>Historically, modeling and sizing of thermoelectric coolers was left to the analyst to work off-line from the modeling task. The analyst would then need to create his own logic in SINDA for simulating the cooler. This presenation will demonstrate how thermoelectric coolers are now easily modeled using off-the-shelf simulation routines and 3D user interfaces. The analytical demonstration includes sizing of a cooler for a specific application based on area, temperature requirements and heat load through a series of parametric analyses. Cooler performance will also be characterized at the device and system level.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-vnd-ms-powerpoint file--x-office-presentation"> <a href="/sites/default/files/publications/ModelingAndSizingTECs_0.pps" type="application/vnd.ms-powerpoint">ModelingAndSizingTECs.pps</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">Aerospace Thermal Control Workshop</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Jane Baumann</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 20:33:31 +0000 bfc-admin 1208 at https://www.crtech.com Modeling Transient Operation of Loop Heat Pipes using Thermal Desktop https://www.crtech.com/modeling-transient-operation-loop-heat-pipes-using-thermal-desktop <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">Modeling Transient Operation of Loop Heat Pipes using Thermal Desktop</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T16:31:43-04:00" title="Wednesday, July 15, 2015 - 16:31" class="datetime">Wed, 07/15/2015 - 16:31</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>Loop heat pipes (LHPs) are used in multiple terrestrial and space applications. Transient analysis of conventional and advanced loop heat pipes with complex radiators under varying conditions where the heat load and the effective sink temperature change in time can be best accomplished using Thermal Desktop™.</p> <p>This paper presents a transient model of a LHP developed using Thermal Desktop™ (Sinda/Fluint). It includes the evaporator connected to the reservoir and condenser with fluid transport lines with bends, flow balancers, and connectors. The condenser is bonded to a honeycomb panel with two face-sheets spreading thermal energy across the radiating surfaces. The model was correlated to the thermal-vacuum test data.</p> <p>The modeling provided better understanding of the critical transient fluid-flow mechanisms encountered in the LHP under transient operational conditions. Analysis of the numerical results shows that the secondary wick should be transporting liquid from the reservoir to the primary wick during transient operation where the sink temperature is decreasing or the evaporator heat load is being reduced.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-pdf file--application-pdf"> <a href="/sites/default/files/publications/TFAWS07-1008_0.pdf" type="application/pdf">TFAWS07-1008.pdf</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">TFAWS</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Dmitry Khrustalev</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 20:31:43 +0000 bfc-admin 1206 at https://www.crtech.com Noncondensible Gas, Mass, and Adverse Tilt Effects on the Start-up of Loop Heat Pipes https://www.crtech.com/noncondensible-gas-mass-and-adverse-tilt-effects-start-loop-heat-pipes <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">Noncondensible Gas, Mass, and Adverse Tilt Effects on the Start-up of Loop Heat Pipes</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T13:49:14-04:00" title="Wednesday, July 15, 2015 - 13:49" class="datetime">Wed, 07/15/2015 - 13:49</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>In recent years, loop heat pipe (LHP) technology has transitioned from a developmental technology to one that is flight ready. The LHP is considered to be more robust than capillary pumped loops (CPL) because the LHP does not require any preconditioning of the system prior to application of the heat load, nor does its performance become unstable in the presence of two-phase fluid in the core of the evaporator. However, both devices have a lower limit on input power: below a certain power, the system may not start properly. The LHP becomes especially susceptible to these low power start-ups following diode operation, intentional shut-down, or very cold conditions. These limits are affected by the presence of adverse tilt, mass on the evaporator, and noncondensible gas in the working fluid. Based on analytical modeling correlated to start-up test data, this paper will describe how the minimum power required to start the loop is increased due to the presence of mass, noncondensible gas, and adverse tilt. The end-product is a methodology for predicting a “safe start” design envelope for a given system and loop design.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-pdf file--application-pdf"> <a href="/sites/default/files/publications/1999-01-.pdf" type="application/pdf">1999-01-.pdf</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">ICES</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Jane Baumann, Brent Cullimore, Boris Yendler, Eva Buchan</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 17:49:14 +0000 bfc-admin 1170 at https://www.crtech.com Steady State and Transient Loop Heat Pipe Modeling https://www.crtech.com/steady-state-and-transient-loop-heat-pipe-modeling <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">Steady State and Transient Loop Heat Pipe Modeling</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T13:47:59-04:00" title="Wednesday, July 15, 2015 - 13:47" class="datetime">Wed, 07/15/2015 - 13:47</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>The NASA-standard thermohydraulic analyzer, SINDA/ FLUINT, has been used to model various aspects of loop heat pipe &nbsp;(LHP) operation for more than 12 years. Indeed, this code has many features that were specifically designed for just such specialized tasks, and is unique in this respect. Furthermore, SINDA is commonly used at the vehicle (integration) level, has a large user base both inside and outside the aerospace industry, has several graphical user interfaces, preprocessors, postprocessors, has strong links to CAD and structural tools, and has built-in optimization, data correlation, parametric analysis, reliability estimation, and robust design tools.</p> <p>Nonetheless, the LHP community tends to ignore these capabilities, yearning instead for “simpler” methods. However, simple methods cannot meet the challenging needs of LHP modeling such as transient start-up and noncondensible gas (NCG) effects, are often hardware-specific or proprietary, or cannot be used in a vehicle-level analysis.</p> <p>There are many reasons for this hesitancy to use SINDA/ FLUINT as it was intended. First, hardware developers tend to be less versed in analytic methods than the user community they serve. Second, there are political hurdles, such as the fact that ESA contractors are required to use ESA sponsored software. Third, the state-of-the-art in LHPs is not so advanced that the analysts can be ignorant of the complex two-phase thermohydraulic and thermodynamic processes and phenomena involved, and unfortunately most thermal analysts are accustomed only to “dry” thermal control (radiation, conduction, etc.).</p> <p>Fourth, the general-purpose and complete nature of SINDA/FLUINT tends to make it intimidating, especially in light of the third reason listed above. SINDA/FLUINT is not designed strictly for LHPs or even for LHP-like systems; it has been used for everything from nuclear reactor cooling to dynamic models of human hearts and tracheae. The user’s manuals and standard training classes† &nbsp;rarely mention capillary phenomena because only a fraction of SINDA/FLUINT’s users are thus inclined. It is to address this fourth reason that this paper has been written, since the authors can do little to redress the first three problems.</p> <p>This paper summarizes the available modeling capabilities applicable to various LHP design and simulation tasks. Knowledge of LHPs is assumed.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-pdf file--application-pdf"> <a href="/sites/default/files/publications/lhp.pdf" type="application/pdf">lhp.pdf</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">ICES</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Brent Cullimore, Jane Baumann</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 17:47:59 +0000 bfc-admin 1169 at https://www.crtech.com A Methodology for Enveloping Reliable Start-up of LHPs https://www.crtech.com/methodology-enveloping-reliable-start-lhps <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">A Methodology for Enveloping Reliable Start-up of LHPs</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T13:47:22-04:00" title="Wednesday, July 15, 2015 - 13:47" class="datetime">Wed, 07/15/2015 - 13:47</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>The loop heat pipe (LHP) is known to have a lower limit on input power. Below this limit the system may not start properly creating the potential for critical payload components to overheat. The LHP becomes especially susceptible to these low power start-up failures following diode operation, intentional shut-down of the device, or very cold conditions. These limits are affected by the presence of adverse tilt, mass on the evaporator, and noncondensible gas in the working fluid. Based on analytical modeling correlated to startup test data, this paper will describe the key parameters driving this low power limit and provide an overview of the methodology for predicting a “safe start” design envelope for a given system and loop design. The amount of incipient superheat was found to be key to the enveloping procedure. Superheat levels have been observed to vary significantly based on evaporator design and even from unit to unit of identical designs. Statistical studies of superheat levels and active measures for limiting superheat should be addressed by both the hardware vendors and the system integrators.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-pdf file--application-pdf"> <a href="/sites/default/files/publications/AIAA2000-2285.PDF" type="application/pdf">AIAA2000-2285.PDF</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">AIAA Thermophysics</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Jane Baumann, Brent Cullimore, Jay Ambrose, Eva Buchan, Brois Yendler</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 17:47:22 +0000 bfc-admin 1168 at https://www.crtech.com Viability of Loop Heat Pipes for Space Solar Power Applications https://www.crtech.com/viability-loop-heat-pipes-space-solar-power-applications <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">Viability of Loop Heat Pipes for Space Solar Power Applications</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T13:44:53-04:00" title="Wednesday, July 15, 2015 - 13:44" class="datetime">Wed, 07/15/2015 - 13:44</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>The primary thermal management issue associated with Space Solar Power (SSP) is the need to acquire, transport and reject waste heat loads, on the order of 3.8 GW, from the transmitter to remote radiator locations. Previous conceptual studies have focused on transporting these loads to large remote radiators. These concepts assumed the ability to transport the heat either passively or mechanical over large transport distances of 100 meters or more.</p> <p>A recent study, Innovative Deployable Radiators (IDR) for Space Solar Power, focused directly on the thermal control issues. This study has produced new concepts which break the system into small clusters of radiators which have more reasonable transport lengths of 1-2 meters. This study considers a system based on the klystron conversion technologies with a system architecture based on cluster radiators located near the waste heat source. The study evaluated various fluids for use between 50 and 500°C to determine their viability for use in LHPs. The evaluation considered fluid properties in addition to material compatibility with traditional LHP wick and containment materials.</p> <p>The results of this study have provided new insight regarding the feasibility and limitations of LHPs for Space Solar Power applications. New technology development areas have been identified for both traditional LHPs and liquid metal LHPs.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-pdf file--application-pdf"> <a href="/sites/default/files/publications/AIAA2001-3078.pdf" type="application/pdf">AIAA2001-3078.pdf</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">AIAA</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Jane Baumann, Suraj Rawal</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 17:44:53 +0000 bfc-admin 1164 at https://www.crtech.com Guidelines for Modeling Capillary Two Phase Loops At the System Level https://www.crtech.com/guidelines-modeling-capillary-two-phase-loops-system-level <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">Guidelines for Modeling Capillary Two Phase Loops At the System Level</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T13:42:03-04:00" title="Wednesday, July 15, 2015 - 13:42" class="datetime">Wed, 07/15/2015 - 13:42</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>LHPs and CPLs are increasingly accepted as thermal control solutions for spacecraft, and they are being investigated for various terrestrial applications as well. For a potential user of these technologies, modeling at the system level has been difficult, to say the least, and concurrent engineering methods were non-existent. New methods are now available to address these needs and concurrent CAD methods result in fast and accurate model generation. These same tools can be used for system level modeling of heat pipes, both fixed conductance with or without noncondensible gas or variable conductance.</p> <p>Historically the thermal/hydraulic modeling of LHP has been approached with either oversimplified, design specific spreadsheets, or detailed thermal hydraulic models developed by the advanced user or LHP developer. To model these devices properly, and consequently gain confidence in the technology, the user needs to be able to model the LHP at the system level without becoming “caught up” in detail. This does not imply that the intricacies of two-phase flow and heat transfer within the evaporator core and secondary wicks of LHPs and CPLs aren’t important; but they should be left to the developers and the effects of these details can easily be enveloped through a series of steady state analyses. The potential user of the technology should focus on developing quasi-steady analyses to perform worst-case enveloping estimates, statistical treatment of the uncertainties, and post-test calibrations for use in extrapolation to untestable conditions.&nbsp; In a nutshell: if they are going to fly them, they’re first going to have to analyze them, integrated into their own vehicle model.</p> <p>This presentation will identify important LHP and CPL design parameters and how they should be modeled in addition to outlining the criteria for developing a system level model using new concurrent CAD-based methods.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-vnd-ms-powerpoint file--x-office-presentation"> <a href="/sites/default/files/publications/LHPmodelGuide.pps" type="application/vnd.ms-powerpoint">LHPmodelGuide.pps</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">Aerospace Thermal Control Workshop</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Jane Baumann</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 17:42:03 +0000 bfc-admin 1161 at https://www.crtech.com FDM/FEM System-level Analysis of Heat Pipes and LHPs in Modern CAD Environments https://www.crtech.com/fdmfem-system-level-analysis-heat-pipes-and-lhps-modern-cad-environments <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">FDM/FEM System-level Analysis of Heat Pipes and LHPs in Modern CAD Environments</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T13:31:33-04:00" title="Wednesday, July 15, 2015 - 13:31" class="datetime">Wed, 07/15/2015 - 13:31</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-vnd-ms-powerpoint file--x-office-presentation"> <a href="/sites/default/files/publications/aerospace2005heatpipes.pps" type="application/vnd.ms-powerpoint">aerospace2005heatpipes.pps</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">Aerospace Thermal Control Workshop</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">Brent Cullimore, Jane Baumann</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 17:31:33 +0000 bfc-admin 1154 at https://www.crtech.com CAD-based Methods for Thermal Modeling of Coolant Loops and Heat Pipes https://www.crtech.com/cad-based-methods-thermal-modeling-coolant-loops-and-heat-pipes <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--title--publication-files.html.twig x field--node--title.html.twig * field--node--publication-files.html.twig * field--title.html.twig * field--string.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <span class="field field--name-title field--type-string field--label-hidden">CAD-based Methods for Thermal Modeling of Coolant Loops and Heat Pipes</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--title.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--uid--publication-files.html.twig x field--node--uid.html.twig * field--node--publication-files.html.twig * field--uid.html.twig * field--entity-reference.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <span class="field field--name-uid field--type-entity-reference field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'username' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> <span lang="" about="/user/1" typeof="schema:Person" property="schema:name" datatype="">bfc-admin</span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/user/username.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--uid.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--created--publication-files.html.twig x field--node--created.html.twig * field--node--publication-files.html.twig * field--created.html.twig * field--created.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <span class="field field--name-created field--type-created field--label-hidden"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'time' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> <time datetime="2015-07-15T12:39:23-04:00" title="Wednesday, July 15, 2015 - 12:39" class="datetime">Wed, 07/15/2015 - 12:39</time> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/time.html.twig' --> </span> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--node--created.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'links__node' --> <!-- FILE NAME SUGGESTIONS: x links--node.html.twig x links--node.html.twig * links.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/content/links--node.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--body--publication-files.html.twig * field--node--body.html.twig * field--node--publication-files.html.twig * field--body.html.twig x field--text-with-summary.html.twig * field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <div class="clearfix text-formatted field field--name-body field--type-text-with-summary field--label-hidden field__item"><p>As air cooling of electronics reaches the limits of its applicability, the next generation of cooling technology is likely to involve heat pipes and single- or two-phase coolant loops (including perhaps loop thermosyphons, spray cooling, vapor compression refrigeration cycles, and loop heat pipes). These technologies are not suitable for analysis using 2D/3D computational fluid dynamics (CFD) software, and yet the geometric complexities of the thermal/structural models make network-style schematic modeling methods cumbersome.</p> <p>This paper describes techniques whereby CAD linedrawing methods can be used to quickly generate 1D fluid models of heat pipes and coolant loops within a 3D thermal model. These arcs and lines can be attached intimately or via lineal contact or saddle resistances to plates and other surfaces, whether those surfaces are modeled using thermal finite difference methods (FDM) or finite element methods (FEM) or combinations of both. The fluid lines can also be manifolded and customized as needed to represent complex heat exchangers and plumbing arrangements.</p> <p>To demonstrate these concepts, two distinct examples are developed: a copper-water heat pipe, and an aluminumammonia loop heat pipe (LHP) with a serpentined condenser. A summary of the numerical requirements for system-level modeling of these devices is also provided.</p> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field--text-with-summary.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-upload-files--publication-files.html.twig * field--node--field-upload-files.html.twig * field--node--publication-files.html.twig * field--field-upload-files.html.twig * field--file.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-upload-files field--type-file field--label-inline clearfix"> <div class="field__label">Upload Files</div> <div class="field__item"> <!-- THEME DEBUG --> <!-- THEME HOOK: 'file_link' --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> <span class="file file--mime-application-pdf file--application-pdf"> <a href="/sites/default/files/publications/cadloopmodelingrevised.pdf" type="application/pdf">cadloopmodelingrevised.pdf</a></span> <!-- END OUTPUT from 'themes/crtechd9/templates/field/file-link.html.twig' --> </div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-source--publication-files.html.twig * field--node--field-source.html.twig * field--node--publication-files.html.twig * field--field-source.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-source field--type-string field--label-inline clearfix"> <div class="field__label">Source</div> <div class="field__item">ICES</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <!-- THEME DEBUG --> <!-- THEME HOOK: 'field' --> <!-- FILE NAME SUGGESTIONS: * field--node--field-author--publication-files.html.twig * field--node--field-author.html.twig * field--node--publication-files.html.twig * field--field-author.html.twig * field--string.html.twig x field.html.twig --> <!-- BEGIN OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> <div class="field field--name-field-author field--type-string field--label-inline clearfix"> <div class="field__label">Author</div> <div class="field__item">David A. Johnson, Jane Baumann, Brent Cullimore</div> </div> <!-- END OUTPUT from 'themes/crtechd9/templates/classy/field/field.html.twig' --> Wed, 15 Jul 2015 16:39:23 +0000 bfc-admin 1142 at https://www.crtech.com