Part 2: Introduction to LHP Modeling

This webinar explains how the toolbox approach of Thermal Desktop and FloCAD can be used to design and simulate LHPs at a system level, where the focus is on predicting conductance of nominally operating LHP, including thermostatic control (variable conductance).

This webinar is the second of a four-part webinar series on LHPs and approaches to modeling them. Each webinar is designed to be attended in the order they were presented. If you miss one in the series, please check out our video page for a recording, or contact us before the next webinar starts.

Prerequisites: Basic understanding of Thermal Desktop and FloCAD operation as applied to two-phase systems. Basic familiarity with LHP components and operation (see Part 1).

Sorry you missed this webinar. A recording is available here.

dispersed vs. coalesced front

Tuesday, June 26, 2018, 1-2pm PT, 4-5pm ET

This webinar describes flat-front modeling, including where it is useful and how it works. A flat-front assumption is a specialized two-phase flow method that is particularly useful in the priming (filling or re-filling with liquid) of gas-filled or evacuated lines. It also finds use in simulating the gas purging of liquid-filled lines, and in modeling vertical large-diameter piping.

Prerequisites: It is helpful to have a background in two-phase flow, and to have some previous experience with FloCAD Pipes.

Register here for this webinar